All of our gear is CE certified
FJT353
View fullscreen

Jacket Component 2 H2O

Lightweight and waterproof, hooded, off-road adventure jacket

The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received,...
Find out more
What's my size?
Find a dealer
Rating:
0% of 100
0 (0)
EUR 399.99
Please choose your size
  • usp_img
    Class A certified
    According to the EN 17092-4:2020 standard
Key benefits
  • Abrasion-resistant CORDURA® material
  • Laminated hydratex outer shell
  • Ventilated and waterproof in 1 jacket
Jacket Component 2 H2O
Key benefits
Features
Product details
Product information
The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.

Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armor, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.

Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less traveled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.
Fit of this product

Fit

Active fit
The Active fit is designed to provide full freedom of movement while minimizing any excess material that could limit mobility. It is strategically cut and tailored to fit the body where necessary, while allowing unrestricted movement during activity-focused movement.

Comfort features

Adjustability

Adjustment drawcord at hem

Adjustment tab at cuffs


Pockets

Slit pocket at back
The sleeve features a small pocket to hold a card or paper. The pocket is easy accessible.

Two inner pockets

Waterproof slit pocket at waist


Features

Adjustment drawcord at hood

Comfort collar
The comfort collar is added to products to offer more comfort in crucial places. An extra soft fabric is used for a cozy finish.

Detachable hood
The zip-on hood can be easily removed from the jacket.

Climate regulation

Waterproofing

hydratex|3L
A 3-layer construction; the hydratex|3L membrane has a layer of protective tricot laminated on each side of the membrane. This results in a waterproof and breathable membrane that is also very durable.


Ventilation

Zippers on lower arms

Zippers on upper arms

Zipper at upper back

Protection in this product

Protection

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors


Outer shell material

3L CORDURA® 750D ripstop
A three-layer CORDURA® with ripstop properties.

Neoprene
Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.


PWR|Shell ripstop stretch
Durability and great abrasion resistance are the defining characteristics of PWR|Shell, thanks to its special ripstop weaving. Thick reinforcement threads are interwoven at regular intervals into the fabric in a crosshatch pattern known as ripstop.


Visibility

Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Laminated reflection at collar
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflection on hood
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflective logo on back
This product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.

wash & care

Outershell

Machine wash 30°C, mild cycle
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Warnings
Do not use softener
Fasten closures before use / cleaning / impregnation
Refer to the user manual
Wash separately
Remove protectors before cleaning / impregnation
Certification
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating. For more details about certification click here.
Reviews
Write Your Own Review

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You're reviewing:Jacket Component 2 H2O
The article has been added to your cart.