All of our motorcycle clothing is CE certified
FJT334
View fullscreen

Jacket Voltiac 3 H2O

Multi-season jacket with thermal and waterproof liners

This jacket’s previous generations are the epitome of affordable, capable, all-weather touring gear. And when the going gets tough, the...
Find out more
Size guide
Find a dealer
Rating:
0% of 100
0 (0)
£239.99
Please choose your size
  • usp_img
Key benefits
  • Fixed, 100% waterproof liner
  • Great value for money
  • Removable thermal liner
Jacket Voltiac 3 H2O
Key benefits
Features
Product details
Product information
This jacket’s previous generations are the epitome of affordable, capable, all-weather touring gear. And when the going gets tough, the Voltiac 3 H2O stays true to its roots. Only now it’s upgraded with PWR|Ripstop fabric on the shoulder, elbow, and forearm areas, plus an outer shell construction in 600-denier polyester that’s form-fitting and more than tough enough to withstand the elements.

Switch seasons
You’ll never be caught out by the weather in the Voltiac 3 H2O. The hydratex|Sphere mesh G-liner is waterproof yet breathable. The thermal liner will keep you cozy during most seasons, while two ventilation zippers are sealed to avoid water ingress and open the full length of your chest to optimize airflow when required. Warm, cold, wind, rain, or shine, in the Voltiac you’ll adjust just fine.

Protection you can trust
We could talk about motorcycle jackets all day long – and we often do. But it’s the people wearing them who matter the most. When designing and developing an affordable jacket, there is no compromise, and you can expect the same level of protection and upgrade options as with our top-of-the-range REV’IT! jackets – SEESMART CE-Level 1 at the shoulders and elbows, plus an insert for an optional SEESOFT CE-Level 2 back protector.
Fit of this product

Fit

Regular fit
The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.

Comfort features

Adjustability

Adjustment drawcord at hem

Adjustment strap at waist

Adjustment tab at cuffs

Adjustment tab at upper arm

Flexisnap at collar
The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.


Pockets

Inner pocket within thermal liner
The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.

Slit pocket at chest

Two hand warmer pockets

Two stash pockets at front


Features

Short connection zipper

Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.

Two-way Collar Snap Closure System

V-flap at cuff

Climate regulation

Waterproofing

hydratex|Mesh G-liner
The 100% waterproof hydratex|G-liner coating is applied to the mesh inner lining of the garment. The seams are sealed for maximum waterproofness. This makes the wearing comfort optimal, while the functional properties of the G-liner construction are preserved.


Insulation

Detachable thermal liner


Ventilation

Air outlet on upper back

Zippers on chest

Protection in this product

Protection

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors


Outer shell material

Polyester 600D
This fabric made of polyester yarn makes a perfect, form-fitting medium for areas at lower risk of impact, keeping riders comfortable.

Polyester ripstop


Visibility

Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Laminated reflection at chest
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflection at lower arms
Retroreflective, fluorescent lamination at the lower arms to aid visibility and improve safety in low-light situation.

wash & care

Outershell

Machine wash 30°C, mild cycle
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Warnings
Do not use softener
Fasten closures before use / cleaning / impregnation
Refer to the user manual
Remove protectors before cleaning
Wash inside out

Removable thermal liner

Machine wash 30°C, mild cycle
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Warnings
Do not use softener
Dry naturally / completely before storing
Use mild detergent
Reviews
Write Your Own Review

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You're reviewing:Jacket Voltiac 3 H2O
Your Rating
The article has been added to your cart.