Jacket Offtrack 2 H2O
Versatile all-season jacket for adventure riding
- 3-layer adventure jacket
- Large ventilation panels
- WP liner can be worn over the jacket
Versatile line-up
Confidence-inspiring design puts the focus on your unfolding adventure. When it’s hot out in the wild, well-proportioned ventilation panels increase airflow, while zippers on the forearms and back ventilate your upper body. Should the temperature drop, just zip the detachable thermal liner into the PWR|Shell, PWR|Ripstop outer. And in adverse weather, switch to the hydratex liner to stay dry. The thermal liner & removable waterproof liner are both separate wearable stand-alone jackets. The waterproof liner is also wearable over the top of the outer shell jacket, making the 100% waterproof WL the outermost layer for extreme wet weather conditions. One jacket, three modes; all the versatility.
Explore safe
Knowing your jacket is keeping you safe helps you enjoy the thrill of adventure riding – that’s the thinking behind the Offtrack 2 H2O jacket. It’s also why it’s equipped with SEEFLEX CE-rated protection at the shoulders and elbows, plus the option of SEESOFT protectors for your back and chest.
Fit
Regular fitThe Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
Adjustability
Adjustable elbow protectionThe adjustable elbow protection pockets allow you to tailor the CE-rated elbow protection to three different heights to perfectly fit your body and for optimal comfort while riding.
Adjustment drawcord at hem
Adjustment strap at lower arm
Adjustment tab at cuffs
Adjustment tab at upper arm
Double adjustment strap at waist
Flexisnap at collar
The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.
Pockets
Inner pocket within thermal linerThe internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
Stash pocket on back
Two external pockets at thermal liner
Two inner pockets
Two stash pockets at front
Two inner waterproof pockets on waterproof liner
Waterproof inner pocket within waterproof liner
The internal pocket within the waterproof liner is waterproof.
Lining
MeshSoft spacer mesh
In-between, mesh lining to assure wearing comfort and fit.
Features
Cuff zipperThe zipper at the cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer shell and over your base layer.
Long connection zipper
The long connection zipper is the longer, more secure choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
3L hydratex over jacket
Specifically designed waterproof jacket to wear over the outer shell.
Separately wearable thermal liner
Thermal liner doubles as separately wearable jacket off the bike.
Short connection zipper
The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
V-flap at cuff
Waterproofing
Detachable hydratex|3L linerA 3-layer construction. The membrane has a layer of protective tricot laminated on each side of the membrane. This results in a waterproof and breathable membrane that is also very durable. This type of membrane also offers maximum flexibility, as it can be removed from the garment: wear the membrane inside the garment when the weather demands it, or take it out when you need maximum ventilation.
Insulation
Detachable thermal linerVentilation
Air outlet on upper backVentilation panels on chest
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.
Zippers on lower arms
Protection
Ready for Avertum Tech-Air® airbag system - ONE SIZE UPUnder this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
SEEFLEX CE-level 2 Elbow Protectors
Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
SEEFLEX CE-level 2 Shoulder Protectors
Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
Soft spacer mesh protector pockets
In-between, mesh lining to assure positioning of protection components.
Outer shell material
High density polyester 600DThis fabric takes polyester yarn and weaves it with a finer polyester yarn, to create a high woven density that increases protection and abrasion-resistance.
Mesh
PWR| shell ripstop
Fabric made for durability and abrasion resistance thanks to its special ripstop weaving with interwoven reinforcement threads at regular intervals.
Softshell 3L
Visibility
Laminated reflection on backReflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.
Laminated reflection at chest
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Laminated reflection on shoulders
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Laminated reflection at upper arms
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Outershell
Machine wash 30°C, mild cycle | |
Do not bleach | |
Do not tumble dry | |
Do not iron | |
Do not dry clean |
Refer to the user manual |
Remove protectors before cleaning |
Wash inside out |
Removable waterproof liner
Machine wash 30°C, mild cycle | |
Do not bleach | |
Do not tumble dry | |
Do not iron | |
Do not dry clean |
Use mild detergent |
Wash inside out |
Removable thermal liner
Machine wash 30°C, very mild/wool cycle | |
Do not bleach | |
Do not tumble dry | |
Do not iron | |
Do not dry clean |
Use mild detergent |
Wash inside out |