Jacket Control Air H2O Ladies
Female-specific, ventilated textile jacket with detachable waterproof liner
-
Class AA certifiedAccording to the EN 17092-3:2020 standard
- Extremely ventilated, textile construction
- Progressive, urban sport jacket design
- Waterproof thanks to its detachable liner
Its own vibe
When we created the Control Air H2O Ladies jacket, we had a very distinct vision. It was to be the seamless blending of both motorsport and sportswear (think lamination around the zippers and tonal graphic prints). And unlike in the past - where any item in a “family” of jackets/pants/one-pieces - echoed almost identical aesthetics, we did something new. The Control Air H2O Ladies jacket incorporates the use of ergonomic gradient shapes built out of diamonds and applied it in its own unique way along the back of the arms. This way, it’s immediately recognizable as a member of the “Control” series, but with its own fashion-focused twist.
Stay cool. Stay dry.
The Control Air H2O Ladies is heavily ventilated - think about 2/3 (or slightly more) of the front constructed with PWR|Mesh, and about the same ratio around back. That said, we recognize not every day will be as hot as another. For the days when you need some protection against the wind and rain, we included a separately wearable hydratex 2L waterproof membrane.
Fit
Regular fitThe Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
Adjustability
Adjustment strap at waistAdjustment tab at upper arm
Pockets
Two slit pockets on frontWaterproof inner pocket within waterproof liner
The internal pocket within the waterproof liner is waterproof.
Lining
MeshFeatures
Jeans loopThe loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.
Short connection zipper
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
Waterproofing
Detachable hydratex|Lite linerVentilation
Fully ventilated meshProtection
3D mesh protector pocketsPrepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
SEESMART CE-level 1 Shoulder Protectors
SEESMART CE-level 1 Elbow Protectors
Outer shell material
High density polyester 600DThis fabric takes polyester yarn and weaves it with a finer polyester yarn, to create a high woven density that increases protection and abrasion-resistance.
Polyester ripstop
Visibility
Laminated reflection on backReflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.
Outershell
Machine wash 30°C, mild cycle | |
Do not bleach | |
Do not tumble dry | |
Do not iron | |
Do not dry clean |
Do not use softener |
Fasten closures before use / cleaning / impregnation |
Refer to the user manual |
Remove protectors before cleaning |
Wash inside out |
Removable waterproof liner
Machine wash 30°C, mild cycle | |
Do not bleach | |
Do not tumble dry | |
Do not iron | |
Do not dry clean |
Do not use softener |
Fasten closures before use / cleaning / impregnation |
Use mild detergent |
Wash inside out |