Search
My account
Menu
Menu
All of our gear is CE certified
FCL020
main product photo
View fullscreen

Combi Argon 2

Race-derived, full-leather combi suit for sport street riders

Built upon the success of the Argon 2 entry-level, one-piece race suit we bring you the Argon combi. A full-leather, zip-together jacket...
Find out more
  1. Combi Argon 2
  2. Combi Argon 2
What's my size?
Find a dealer
Rating:
0% of 100
0 (0)
EUR 849.99
Please choose your size
Key benefits
  • Airbag compatible (go up one size)
  • CE Class AAA-rated, two-piece design
  • Extremely well ventilated
Combi Argon 2
Key benefits
Features
item-1

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size.

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
feature-Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Features
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Product details
Product information
Built upon the success of the Argon 2 entry-level, one-piece race suit we bring you the Argon combi. A full-leather, zip-together jacket and pants outfit for sport street riders.

Good genes
The Argon 2 combi suit carries the same race aesthetic as part of the Argon 2 product family. We made a couple of changes to diversify the combi though. The prints are similar to the one-piece but reversed. More ergonomic perforation has been added to keep you cool plus the suit is build for high-speed riding, enabling the wearer to take corners at high speeds. How is that achieved? Well, the suit is aggressively pre-shaped and uses the same materials as the Argon 2 racing suit.

Future forward
Since we’re always thinking about what the future holds, we wanted to make sure that if you chose to outfit the Argon 2 with the Tech-Air® airbag, that you’d be able to. It’s actually our first combi suit that is specifically designed with Airbag compatibility in mind. The renewed shape and softer compound of the speedhump combined with additional stretch allow for it. And like with many of our garments that can make use of the airbag, we suggest going one size up to be on the safe side.

Built-in safety
With a AAA CE classification, you know you’re in good hands with the Argon 2 combi. Furthermore, knee sliders, interior armor at the elbows, shoulders, knees, and hips come standard, along with TPU protectors at the shoulders.
Fit of this product

Fit

Tight fit
The Tight fit is designed to be snug and conform to the rider's body shape. The contouring design ensures that the material and fabrics move with the body, without restricting the range of motion in any situation. This fit is mostly found in base layers and in our race-oriented garments.

Comfort features

Pockets

Inner pocket

Inner napoleon pocket

Two inner pockets


Lining

3D mesh

Mesh


Features

Adjustable protector pockets

B-lock button closure at front

Calf zipper for easy entrance
This garment has an easy entrance zipper at the calves to more comfortably suit up despite its snug race fit. Simply unzip for extra room when suiting up, then zip it up when you’re ready to go.

Comfort collar
The comfort collar is added to products to offer more comfort in crucial places. An extra soft fabric is used for a cozy finish.

Comfort cuffs

Cuff zipper
The zipper at the cuff has several purposes. It allows for easier entry into the sleeve, provides extra ventilation on warm days, and allows you to easily wear the glove cuff under your outer shell and over your base layer.

Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.

Speed hump

Stretchable cuff

Stretch at ankle
The stretch at the ankle of this garment allows for more freedom of movement and comfort when being worn, as well as easy on/off.

Stretch at armholes

Stretch at calf

Stretch at crotch

Stretch at inside arms

Stretch at inside knee

Stretch at inside of legs

Stretch at shoulders

Stretch at waist

Stretch lips at back

Stretch lips at knees

Climate regulation

Insulation

Wind catcher behind cuff zipper

Wind catcher behind front zipper
Behind the front a panel has been installed to block the wind.


Ventilation

Perforation on upper front

PWR|Fuse air mesh on speed hump

Protection in this product

Protection

Coccyx Protection

Dual comp knee slider type A
Dual-comp knee sliders type A are constructed from a high-performance TPU compound, combined with an extra durable PA6 compound. Specially designed for racers who want high-performance sliders, these higher-quality compounds offer good feedback, giving you maximum durability without compromising your feel on the road. The sliders come in a pair of two, each anatomically shaped to fit either the left or the right knee, and high-quality Velcro attaches the sliders to leathers, ensuring they stay where they need to. Type A sliders are available in three colours, to fit every colour combination of your leathers, and the dual-injected colours keep the design visible even when the sliders begin to wear.

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.

Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.

Safety seams
The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.

SEEFLEX CE-level 2 Elbow Protectors
Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

SEEFLEX CE-level 2 Shoulder Protectors
Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

SEEFLEX CE-level 2 Knee Protectors
Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

SEESMART CE-level 1 Hip Protectors

TPU protection at shoulder


Outer shell material

Artificial Leather
A sythetic version of leather with a similar look.

Artificial nubuck

buffalo leather
Buffalo is a type of leather that distinguishes itself from cowhide with a more rugged appearance. The finish provides a classical look, allowing it to age beautifully.

Neoprene
Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.


Polyester stretch

wash & care

Outershell

Do not wash
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Warnings
Dry naturally / completely before storing
Make sure that your product is completely dry before you store it
Use REV'IT! designated (leather) cleaning agents only
Reviews
Write Your Own Review

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You're reviewing:Combi Argon 2
The article has been added to your cart.