Jacket Control H2O
Waterproof, motorsport-inspired, textile jacket for sport street riders
-
Class AA certifiedAccording to the EN 17092-3:2020 standard
- AA-rated, waterproof, textile construction
- Detachable, full-sleeve thermal liner
- Progressive, urban sport jacket design
Its own vibe
When we created the Control H2O jacket, we had a very distinct vision. It was to be the seamless blending of both motorsport (think hard parts at the shoulders) and sportswear (think lamination around the zippers and tonal graphic prints). And unlike in the past - where any item in a “family” of jackets/pants/one-pieces - echoed almost identical aesthetics, we did something new. The Control H2O jacket is not a direct copy of leather series (jacket and one-piece suit); however, we took the graphics story of the ergonomic gradient shapes built out of diamonds and applied it in its own unique way on the chest panels and upper arms. This way, it’s immediately recognizable as a member of the “Control” series, but with its own fashion-focused twist.
Every(rainy)day functionality
For the days when the rain is coming down, you’re covered. The Control H2O jacket comes with the hydratex|Mesh G-liner construction along with a detachable thermal liner (to keep the cold away when necessary). And when the sun is out and you need to breathe a bit more, take the liner out and open the exhaust vents on the lower sleeves and upper back.
Fit
Regular fitThe Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
Adjustability
Adjustment strap at waistAdjustment tab at upper arm
Pockets
Inner pocket within thermal linerThe internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
Two slit pockets on front
Lining
MeshFeatures
Jeans loopThe loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.
Short connection zipper
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
V-flap at cuff
Waterproofing
hydratex|Mesh G-linerThe 100% waterproof hydratex|G-liner coating is applied to the mesh inner lining of the garment. The seams are sealed for maximum waterproofness. This makes the wearing comfort optimal, while the functional properties of the G-liner construction are preserved.
Insulation
Detachable thermal linerWind & water catcher behind front zipper
Ventilation
Air outlet on upper backZippers on lower arms
Protection
3D mesh protector pocketsPrepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
TPU protection at shoulder
Outer shell material
High density polyester 600DThis fabric takes polyester yarn and weaves it with a finer polyester yarn, to create a high woven density that increases protection and abrasion-resistance.
Polyester ripstop
Softshell 3L
Visibility
Laminated reflective logo on backThis product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.
Outershell
Machine wash 30°C, mild cycle | |
Do not bleach | |
Do not tumble dry | |
Do not iron | |
Do not dry clean |
Do not use softener |
Fasten closures before use / cleaning / impregnation |
Refer to the user manual |
Remove protectors before cleaning |
Wash inside out |
Removable thermal liner
Machine wash 30°C, mild cycle | |
Do not bleach | |
Do not tumble dry | |
Do not iron | |
Do not dry clean |
Do not use softener |
Dry naturally / completely before storing |
Fasten closures before use / cleaning / impregnation |
Use mild detergent |