All of our gear is CE certified
FJT346
View fullscreen

Jacket Denver H2O

All-season jacket with PWR|Shell and Cordura®

Applying a modern twist to the enduring Denver design – the inspiration to make this jacket as iconic as the original. A four-pocket...
Find out more
What's my size?
Find a dealer
Rating:
0% of 100
0 (0)
EUR 399.99
Please choose your size
  • usp_img
    Class A certified
    According to the EN 17092-4:2020 standard
Key benefits
  • Hard-shell construction
  • Internal and external waterproof pockets
  • Separately wearable thermal liner
Jacket Denver H2O
Key benefits
Features
Product details
Product information
Applying a modern twist to the enduring Denver design – the inspiration to make this jacket as iconic as the original. A four-pocket look might be ubiquitous, but we’ve made it unique: aesthetic detailing, a host of safety features, and a high-performance technical spec that sets REV’IT! apparel apart from the crowd.

Rethinking storage
With so many pocket designs to choose from, it would have been all too easy to stray from the classic look. Instead, we played with position and convenience. Like gusseting the right upper stash pocket on a 20-degree slant for even easier access while you ride. On the left, a zipped Napoleon pocket provides sleek, secure storage, and all Denver’s pocket inners and zips are waterproof.

Refining protection
PWR|Shell and CORDURA® Ripstop textiles join forces to boost abrasion resistance at the shoulders and arms. This all-season jacket has your back – there’s all the high-spec REV’IT! protection you’d expect: SEESMART CE-rated shoulder and elbow pads, and an insert for an optional SEESOFT back protector.
Fit of this product

Fit

Loose fit
The Loose fit is designed to prioritize both comfort and esthetics. Unlike the Regular fit, the Loose fit has a more relaxed and generous cut which allows for maximum comfort and freedom of movement. This style also has a more casual look which adds to its appeal.

Comfort features

Adjustability

Adjustment drawcord at waist

Adjustment tab at collar

Adjustment tab at cuffs


Pockets

External pocket on thermal liner

Slit pocket at chest

Two hand warmer pockets

Two inner pockets

Two waterproof stash pockets at waist

Inner waterproof napoleon pocket

Waterproof stash pocket at chest


Features

Adjustable FidLock® collar closure
Adjustable collar closure with FidLock® - a patented design that uses magnets to easily and effectively open and close.

Separately wearable thermal liner
Thermal liner doubles as separately wearable jacket off the bike.

Short connection zipper

Two-way front zipper

V-flap at cuff

Zipper and button-closure front
Front closure that uses both a zipper and buttons for esthetic purposes, to assure effective closing of the jacket, and to block out wind.

Climate regulation

Waterproofing

hydratex|3L
A 3-layer construction; the hydratex|3L membrane has a layer of protective tricot laminated on each side of the membrane. This results in a waterproof and breathable membrane that is also very durable.


Insulation

Detachable thermal liner

Protection in this product

Protection

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors


Outer shell material

3L CORDURA® 750D ripstop
A three-layer CORDURA® with ripstop properties.

PWR|Shell ripstop stretch
Durability and great abrasion resistance are the defining characteristics of PWR|Shell, thanks to its special ripstop weaving. Thick reinforcement threads are interwoven at regular intervals into the fabric in a crosshatch pattern known as ripstop.


Visibility

Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

wash & care

Outershell

Machine wash 30°C, mild cycle
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Warnings
Do not use softener
Fasten closures before use / cleaning / impregnation
Refer to the user manual
Remove protectors before cleaning / impregnation

Removable thermal liner

Machine wash 30°C, mild cycle
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Certification
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating. For more details about certification click here.
Reviews
Write Your Own Review

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You're reviewing:Jacket Denver H2O
The article has been added to your cart.